Ford Focus Service Manual: Oil Pump Screen and Pickup Tube

Ford Focus Service Manual / Powertrain / Engine / Engine Lubrication / Oil Pump Screen and Pickup Tube

Removal

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.

Remove the oil pan. For additional information, refer to Oil Pan in this section.

Remove the 2 bolts and the oil pump screen and pickup tube.
- Discard the gasket.

Installation

Clean and inspect all mating surfaces.

Using a new gasket, install the oil pump screen and pickup tube and the 2 bolts.
- Tighten to 10 Nm (89 lb-in).

Install the oil pan. For additional information, refer to Oil Pan in this section.

Oil Level Indicator and Tube

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO- ...

Oil Pump

Material Item Specification Motorcraft® Metal Surface Prep ZC-31-A — Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W- ...

More about Ford Focus:

Ford Focus Diagnostic Parameters Identification (PID) Chart
Using Output State Control and Accessing PIDs To confirm that the output state control value was sent by the scan tool and the PCM has accepted the output state control substitution, a corresponding PID or PIDs for each output state control parameter should be monitored. Additional PIDs shou ...