Ford Focus Service Manual: Manual

Ford Focus Service Manual / Powertrain / Transmission/Transaxle / Manual

Clutch - Description and Operation
Differential - Disassembly and Assembly of Subassemblies
Engine - Manual Transaxle - Installation
Engine - Manual Transaxle - Removal
External Controls
Input Shaft
Manual Transaxle/Transmission - MTX75
Clutch System Bleeding
Manual Transaxle and Clutch
Clutch Disc and Pressure Plate
Clutch Master Cylinder
Clutch Slave Cylinder
Clutch Slave Cylinder Check
Clutch Disc and Pressure Plate

Flywheel Runout Check

NOTICE: Do not clean the dual mass flywheel with any kind of fluid. Use a dry cloth only or damage to the dual mass flywheel may occur. NOTICE: Do not clean the gap between the primary and seconda ...

Clutch - Description and Operation

The clutch operating mechanism consists of the following: Flywheel Pilot bearing Clutch disc Clutch pressure plate Release bearing The primary function of the clutch is to transfe ...

More about Ford Focus:

Ford Focus Key Programming Using Two Programmed Keys - General Procedures
NOTE: This procedure only works if 2 or more programmed ignition keys are available. If 2 keys are not available, refer to Spare Key Programming — Using Diagnostic Equipment in this section. NOTE: The Instrument Cluster (IC) PID SPAREKEY must be enabled for this procedure to operate. If th ...