Ford Focus Service Manual: Window Moulding - Door
| Item | Part Number | Description |
|---|---|---|
| 1 | 6320898 RH/ 6320899 LH | Window moulding — front door |
| 2 | 20124-5 | Front door |
| Item | Part Number | Description |
|---|---|---|
| 1 | 6320898 RH/ 6320899 LH | Window moulding — front door B-pillar |
| 2 | 54254A50 RH/ 54254A51 LH | Window moulding — rear door C-pillar |
| 3 | 5424722 RH/ 5424723 LH | Window moulding — rear door D-pillar |
| 4 | — | Rear door |
| 5 | — | Front door |
Removal and Installation
- Release the retaining clips on the window moulding-to-door.
- Remove and discard the window moulding.
- Pull gently on moulding, starting at the top and release the window moulding pressure sensitive tape from the door.
- NOTE:
Before installing the new window moulding, clean the window moulding mounting area with an appropriate alcohol based cleaner.
Make sure all the old pressure sensitive tape is removed from the window moulding mounting area.
- To install, reverse the removal procedure.
Window Glass - Rear Door
Material
Item
Specification
Seam Sealer
TA-2
—
Removal and Installation
Remove the rear door speaker. For additional information, refer to Section
...
Window Regulator Motor - Front Door
Material
Item
Specification
Seam Sealer
TA-2
—
Removal and Installation
Remove the front door speaker. For additional information, refer to Section
...
More about Ford Focus:
Ford Focus All engines Assembly
NOTE: If the oil squirters are being reused, they must be installed
in the same location as marked during disassembly.
NOTE: The front bulkhead does not have an oil squirter.
Install the 4 oil squirters.
Tighten to 4 Nm (35 lb-in).
Measure each of the cranksh ...
© 2016-2025 Copyright www.ffguide.net
