Ford Focus Owners Manual: Using the telephone - Vehicles Without: Navigation System

This chapter describes the phone functions of the audio unit.

Note: Refer to your audio guide for details of the controls.

An active phone must be present.

Even if connected to the audio unit, your phone can still be used in the usual way.

Note: You can exit the phone menu by pressing any source button CD, AM/FM or AUX.

Making a call

Dialling a number using voice control

Phone numbers can be dialled using voice control. See Telephone commands.

Dialling a number using the address book

You can access your phone address book via Bluetooth. The entries will appear in the unit display.

1. Press the PHONE or the call accept button.

2. Press the MENU button.

3. Keep pressing the MENU button until PHONEBOOK appears.

4. Press the seek buttons to select the desired phone number.

Note: Press and hold the seek button to skip to the next letter in the alphabet.

5. Press the PHONE or the call accept button to dial the selected phone number.

Dialling a number using the address book - Sony radio

You can access your phone address book via Bluetooth. The entries will appear in the unit display.

1. Press the PHONE button.

2. Press the seek button until the phone book is shown.

3. Press the up/down arrow buttons to select the desired phone number.

Note: Press and hold the up/down arrow buttons to skip to the next letter in the alphabet.

4. Press the PHONE or the call accept button to dial the selected phone number.

Dialling a number using the telephone keypad

If you have an audio unit with a telephone keypad (buttons 0-9, * and #):

1. Press the call accept button. Press the PHONE button if you have a Sony radio.

2. Dial the number using the telephone keypad on the audio unit.

3. Press the call accept button.

Note: If you enter an incorrect digit whilst entering a phone number, press the seek left button to erase the last digit. A long press will erase the complete string of digits.

Press and hold 0 to enter a + digit.

Ending a call

Calls can be ended by pressing the call reject button.

Audio units without a telephone keypad can also end a call by pressing either PHONE, CD, AM/FM or ON/OFF, or by pressing the MODE button on the remote control

Redialling a number

1. Press the PHONE or the call accept button.

2. Press the MENU button.

3. Select the CALL OUT list or the CALL IN list. On some audio units, select the MISSED, INCOMING or OUTGOING calls list.

Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled.

4. Press the seek button on the audio unit.

5. Press the PHONE or the call accept button to dial the desired phone number.

Redialling a number - Sony radio

1. Press the PHONE or the call accept button.

2. Press the seek button until the desired list is displayed.

Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled.

3. Press the up/down buttons to select the desired phone number.

4. Press the PHONE or the call accept button to dial the phone number.

Redialling the last dialled number - Sony radio

1. Press the call accept button.

2. Press the call accept button a second time to dial the number.

Receiving an incoming call

Accepting an incoming call

Incoming calls can be accepted by pressing either the call accept button, the PHONE button or the MODE button on the remote control.

Rejecting an incoming call

Incoming calls can be rejected by pressing the call reject button.

Audio units without a telephone keypad can also reject a call by pressing either PHONE, CD, AM/FM or ON/OFF.

Receiving a second incoming call

Note: The second incoming call function must be activated in your phone.

If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call.

Accepting a second incoming call

Second incoming calls can be accepted by pressing either the call accept button, the PHONE button, or the MODE button on the remote control.

Rejecting a second incoming call

Second incoming calls can be rejected by pressing the call reject button. Units without a telephone keypad can also reject a second incoming call by pressing the CD button, or the AM/FM button.

Muting the microphone

During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display.

Audio units with green call accept button

Press the call accept button. Press the button once again to turn this function off.

Audio units without green call accept button

Press the seek up or down button. Press the button once again to turn this function off.

Changing the active phone

Note: Phones must be bonded to the system before they can be made active.

Using the station storage button

Note: This process is only for audio units without a telephone keypad.

1. Press the PHONE button on the audio unit.

2. Press the preset number required (using the station preset buttons 1 - 6).

Using the audio unit menu

Note: After bonding a phone to the system, this becomes the active phone.

1. Press the PHONE or call accept button.

2. Press the MENU button on the audio unit.

3. Select the ACTIVE PHONE option on the audio unit.

4. Scroll through the different stored phones by using the seek buttons to display the bonded phones.

5. Press the MENU button to select the phone which is to be the active phone.

Debonding a bonded phone

A bonded phone can be deleted from the system at any time, unless a phone call is in progress.

1. Press the PHONE or call accept button.

2. Press the MENU button on the audio unit.

3. Select the DEBOND option on the audio unit.

4. Scroll through the different phones by using the seek buttons and display the phone to be debonded.

5. Press the MENU button to select the phone which is to be debonded.

Debonding a bonded phone - Sony radio

A bonded phone can be deleted from the system at any time, unless a phone call is in progress.

1. Press the PHONE button.

2. Press the up/down arrow buttons until you reach the DEBOND option.

3. Scroll through the different phones by using the seek buttons and display the phone to be debonded.

4. Press the OK button to be debond.