Ford Focus Service Manual: Transaxle Support Insulator

Ford Focus Service Manual / Powertrain / Transmission/Transaxle / Transmission Mounts / Transaxle Support Insulator

Special Tool(s)

	Adapter for 303-290 303-290-01
	Adapter for 303-290A (Support Leg) 303-290A-03A
	Support Bar, Engine 303-290A

Transaxle Support Insulator

Item	Part Number	Description
1	W703457	Transaxle support insulator-to-body nuts (4 required)
2	W520215	Transaxle support insulator-to-bracket nut
3	7M121	Transaxle support insulator

Removal

Remove the battery tray. For additional information, refer to Section 414-01.

Install the Engine Support Bar and Adapters and support the engine.

Remove the transaxle support bolt and nuts and remove the transaxle support insulator.

Installation

Install the transaxle support insulator nuts.
- Install the 4 support insulator-to-body nuts.
  - Tighten to 48 Nm (35 lb-ft).
- Install the support insulator-to-bracket nut.
  - Tighten to 150 Nm (111 lb-ft).

Remove the Engine Support Bar and Adapters.

Install the battery tray. For additional information, refer to Section 414-01.

Transaxle Support Insulator - LH

Special Tool(s) Adapter for 303-290A 303-290-01 Adapter for 303-290A (Support Leg) 303-290-03A Support Bar, Engine 303-290A ...

More about Ford Focus:

Ford Focus Camber Adjustment - Rear
Using alignment equipment and the manufacturer's instructions, measure the rear camber. NOTE: If the rear camber is below the minimum specification, the camber can be adjusted +1.0 degree by replacing the upper arm with an upper arm repair kit (3S4Z-1A154-AA). Replace the u ...