Ford Focus Service Manual: Toe Adjustment - Rear
- Jounce the vehicle to make sure that the suspension is in its normal resting position.
- Using alignment equipment and the manufacturer's instructions, measure the toe.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
- Loosen the rear lower arm adjustment cam nut.
- Adjust the toe setting by rotating the nut and eccentric washer.
- Tighten the rear lower arm adjustment cam nut to 90 Nm (66 lb-ft).
- Recheck the toe settings, adjust as necessary.
Toe Adjustment - Front
Using a suitable steering wheel holding device, lock the steering wheel
in the straight ahead position.
Using alignment equipment and the manufacturer's instructions, measure the
t ...
More about Ford Focus:
Ford Focus Cylinder Bore Taper
NOTE: Refer to the appropriate Section 303-01 for the specification.
Measure the cylinder bore at the top, middle and bottom of piston ring travel
in 2 directions as indicated. Verify the cylinder bore is within the wear limit.
The difference indicates the cylinder bore taper. If the cyl ...
© 2016-2026 Copyright www.ffguide.net
