Ford Focus Service Manual: Stoplamp Switch - Removal and Installation
| Item | Part Number | Description |
|---|---|---|
| 1 | — | Stoplamp switch electrical connector (part of 14401) |
| 2 | 13480 | Stoplamp lamp switch |
Removal and Installation
NOTICE: Do not press the brake pedal when installing or removing the stoplamp switch or damage to the stoplamp switch can occur.
- Disconnect the stoplamp switch electrical connector.
- Rotate the stoplamp switch clockwise 45 degrees and remove the stoplamp switch.
- NOTE:
The stoplamp switch is self-adjusting. Do not press the brake pedal during installation. Initial installation of the stoplamp switch allows for one adjustment only. If additional adjustments are necessary, install a new stoplamp switch.
To install, reverse the removal procedure.
Rear Lamp Assembly - Removal and Installation
Item
Part Number
Description
1
N621926
Rear lamp assembly nuts (2 required)
2
13404/13405
Rear lamp assembly (RH/LH)
3
—
Re ...
More about Ford Focus:
Ford Focus Battery Tray
Removal and Installation
Remove the battery. For additional information, refer to Battery in this
section.
Remove the 3 nuts from the battery tray.
To install, tighten to 12 Nm (106 lb-in).
Remove the 4 wire harness pushpins from the battery tray and remove the
t ...
Nissan Frontier - Instrument Panel - Keys - Brake system
