Ford Focus Service Manual: Special Tool(s), General Equipment, Material

Ford Focus Service Manual / Powertrain / Engine / General Information / Engine - 2.0L - Assembly / Special Tool(s), General Equipment, Material

Special Tool(s)

	Aligner, Clutch Disc 308-006 (T71P-7137-H)
	Aligner, Crankshaft Sensor 303-1417
	Alignment Plate, Camshaft 303-465 (T94P-6256-CH)
	Compressor, Piston Ring 303-D032 (D81L-6002-C)
	Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
	2,200# Floor Crane, Fold Away 300-OTC1819E or equivalent
	Holding Tool, Crankshaft Damper 303-1416
	Installer, Camshaft Front Oil Seal 303-096 (T74P-6150-A)
	Installer, Connecting Rod 303-462 (T94P-6136-AH)
	Installer, Crankshaft Rear Main Oil Seal 303-328 (T88P-6701-B1)
	Spreader Bar 303-D089 (D93P-6001-A3) or equivalent
	Timing Peg, Crankshaft TDC 303-507

General Equipment

6 mm x 18 mm bolt

Material

Item	Specification
Motorcraft® High Temperature 4x4 Front Axle and Wheel Bearing Grease XG-11	WSS-M1C267-A1
Motorcraft® Metal Surface Prep ZC-31-A	—
Motorcraft® Gold Antifreeze/Coolant Concentrated VC-7-B (US); CVC-7-B2 (Canada)	WSS-M97B51-A1
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)	WSS-M2C945-A
Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A	ESE-M1C171-A
Motorcraft® Silicone Gasket and Sealant TA-30	WSE-M4G323-A4

Lower Engine Block (View 1)

Item Part Number Description 1 6010 Cylinder block 2 6K318 Crankshaft rear oil seal and retainer 3 6477 Flywheel/flexplate ...

More about Ford Focus:

Ford Focus Exterior Front Door Handle
Removal and Installation NOTE: The door glass must be completely raised. Remove the front door trim panel. For additional information, refer to Section 501-05. Peel back the watershield. Remove the exterior door handle access hole grommet from the door (coupe only). ...