Ford Focus Service Manual: Seat Backrest Latch - Rear
NOTE:
For component identification and locations, refer to Seat — Exploded
View, Front in this section.
- Remove the seat backrest cover. For additional information, refer to Seat
Backrest Cover — Rear in this section.
- Release the retainer and detach the release cable from the backrest frame.
- Route the release strap through the hole in the foam pad.
- Remove the 2 nuts and backrest latch.
- To install, tighten to 22 Nm (16 lb-ft).
- To install, reverse the removal procedure.
NOTE: RH shown, LH similar.
Item
Part Number
Description
1
462452
Backrest latch striker
2
W701210
Backrest latch striker bolts (2 required) ...
More about Ford Focus:
Ford Focus Piston Selection - Engine System
NOTE: The cylinder bore must be within the specifications for taper
and out-of-round before fitting a piston.
Select a piston size based on the cylinder bore.
NOTE: For precision fit, new pistons are divided into 3 categories
within each size range based on their relative pos ...