The roof opening panel consists of the following components:
Roof Opening Panel Operation
The roof opening panel assembly uses an integrated motor and module to operate the roof opening panel. The roof opening panel is an electronically operated glass panel that has one-touch open, one-touch close and one-touch vent features.
To open the roof opening panel, press and release the SLIDE control switch. The roof opening panel will open automatically. The roof opening panel movement can be stopped at any time by pressing the switch again.
To vent the roof opening panel, the roof opening panel must first be in the CLOSED position. Press and release the TILT control switch. The roof opening panel will move to the VENT position automatically. To close the roof opening panel from the VENT position, pull and hold the TILT control switch until the glass panel stops moving.
To close the roof opening panel, pull and release the SLIDE or TILT control switch. The roof opening panel will close automatically. The roof opening panel movement can be stopped at any time by activating the SLIDE or TILT control switch in either direction.
Bounce-Back
The roof opening panel has a bounce-back feature. If an obstacle has been detected in the roof opening panel as the sliding glass is closing, the roof opening panel will automatically open and stop at a predetermined position.
Security Override
To override a bounce-back condition (to overcome the resistance of ice on the roof opening panel seal for example), within 2 seconds of a bounce-back event, pull and hold the SLIDE or TILT control switch. The closing force will begin to increase each time the roof opening panel is closed for the first 3 closing cycles (bounce-back will still be enabled).
Roof Opening Panel Drain Hose Routing — Coupe
NOTE:
Passenger side shown, driver side similar.
Roof Opening Panel Drain Hose Routing — Sedan
NOTE:
Passenger side shown, driver side similar.
Ford Focus Reference Value Parameter Identification (PID)/Measured Signal Chart
The following listing reflects PIDS and/or measured values which may reveal a
possible concern within each system shown. Match the category number with the related
PID/measured signal and go to the Typical Diagnostic Reference Value Charts.
PID/Measured Signal Chart
Category Numbe ...