Ford Focus Service Manual: Parcel Shelf
Item |
Part Number |
Description |
1 |
W706635 |
Parcel shelf pin-type retainers (2 required) |
2 |
46668 |
Parcel shelf |
3 |
— |
Safety belt retractor bezel |
4 |
— |
Safety belt retractor bolt (part of 611B66) |
5 |
611B66 |
Safety belt retractor |
Removal and Installation
All vehicles
- Remove the rear seat cushion.
- From underneath the cushion front edge, push the 2 seat cushion latch
releases toward the LH side of the vehicle.
- Lift up the front edge of the cushion and remove.
- Remove the rear center safety belt anchor bolt.
- To install, tighten to 55 Nm (41 lb-ft).
4 door
- Remove the RH and LH quarter trim panels. For additional information, refer
to Quarter Trim Panel — 4-Door in this section.
2 door
- Remove the RH and LH C-pillar trim panels. For additional information, refer
to C-Pillar Trim Panel in this section.
All vehicles
- Fold the rear seat backs downward to the flat position.
- Remove the safety belt retractor bezel.
- Pull the safety belt retractor bezel toward the front of the vehicle.
- Remove the safety belt retractor bezel from the safety belt.
- Remove the 2 parcel shelf pin-type retainers.
- Remove the parcel shelf.
- Pull the parcel shelf toward the front of the vehicle.
- Pull the center safety belt rearward through the center retractor opening.
- To install, reverse the removal procedure.
Remove the D-pillar trim panel screw cover.
Remove the D-pillar trim panel screw.
Remove the D-pillar trim panel.
Pull the D-pillar trim panel outward to release the D-pillar tr ...
Removal and Installation
Remove the scuff plate trim panel.
Pull the scuff plate trim panel upwards to release the retaining clips.
For additional information on the retaining clip loca ...