Ford Focus Service Manual: License Plate Lamp - Removal and Installation

Ford Focus Service Manual / Body / Body Electrical / Lighting / Exterior Lighting / License Plate Lamp - Removal and Installation

Item	Part Number	Description
1	—	License plate lamp screws (2 required) (part of 13550)
2	—	License plate lamp lens (part of 13550)
3	13466	License plate lamp bulb
4	13550	License plate lamp
5	—	License plate lamp electrical connector (part of 13A444)

Removal and Installation

NOTE:

The license plate lamp does not need to be removed to access the bulb.

Remove the rear bumper cover. For additional information, refer to Section 501-19.

Disconnect the license plate lamp electrical connector.

Release the 2 outboard tabs and remove the license plate lamp from the rear bumper cover.

To install, reverse the removal procedure.

Headlamp Switch - Removal and Installation

Item Part Number Description 1 11654 Headlamp switch 2 — Headlamp switch electrical connector (part of 14401) Removal and Installat ...

Rear Lamp Assembly - Removal and Installation

Item Part Number Description 1 N621926 Rear lamp assembly nuts (2 required) 2 13404/13405 Rear lamp assembly (RH/LH) 3 — Re ...

More about Ford Focus:

Ford Focus Hydraulic Brake Actuation
The hydraulic brake actuation system consists of the following components: Brake master cylinder and fluid reservoir Brake pedal and bracket Brake tubes and hoses The brake pedal is connected to the power brake booster, which is connected to the brake master cylinder. When the brak ...