Ford Focus Service Manual: Inertia Fuel Shutoff (IFS) Switch

Ford Focus Service Manual / Powertrain / Engine / Fuel System / Inertia Fuel Shutoff (IFS) Switch

Item	Part Number	Description
1	W710254	Pin-type retainer (2 required)
2	5402344	RH A-pillar lower trim panel
3	W504169	Inertia Fuel Shutoff (IFS) switch bolt (2 required)
4	9341	IFS switch
5	14A464	IFS switch electrical connector

Removal and Installation

Remove the 2 pin-type retainers and the RH A-pillar lower trim panel.

Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.

NOTICE: Do not overtighten the fasteners or damage to the switch will occur.

Remove the 2 bolts and the IFS switch.
- To install, tighten to 2 Nm (18 lb-in).

To install, reverse the removal procedure.
- If necessary, reset the IFS switch after the installation has been completed.

Fuel Rail

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO- ...

Fuel Level Sender

Item Part Number Description 1 — Fuel level sender electrical connector (part of 9A299) 2 9A299 Fuel level sender 3 9H307 F ...

More about Ford Focus:

Ford Focus Body Sealer Types And Applications - Description and Operation
Seam Sealer Seam Sealer TA-2 or equivalent: is a heavy-bodied, non-sag adhesive/sealer for use on standing cosmetic seams, truck bed seams, tooled door skin seams and floor pans. can be used on water leaks and noise concerns. Clear Silicone Rubber Clear Silicone Rubber TA-32 or eq ...