WARNINGS:
Your vehicle has been tested and certified to European legislations relating to electromagnetic compatibility (2004/104/EC). It is your responsibility to ensure that any equipment you have fitted complies with applicable local legislations. Have any equipment fitted by properly trained technicians.
Radio frequency (RF) transmitter equipment (e.g. cellular telephones, amateur radio transmitters etc.) may only be fitted to your vehicle if they comply with the parameters shown in the table below. There are no special provisions or conditions for installations or use.
Do not mount any transceiver, microphones, speakers, or any other item in the deployment path of the airbag system.
Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes.
Keep antenna and power cables at least 100mm from any electronic modules and airbags.
1Only for GSM/3G cellular phones, with a patch antenna installed inside of the front windscreen.
Note: After the installation of RF transmitters, check for disturbances from and to all electrical equipment in the vehicle, both in the standby and transmit modes.
Check all electrical equipment:
• with the ignition ON.
• with the engine running.
• during a road test at various speeds.
Check that electromagnetic fields generated inside the vehicle cabin by the transmitter installed do not exceed human exposure limits specified in EU directive 2004/40/EC.
Ford Focus Ford PID List
Note: This is not a complete list of Ford PIDs available. This is
a list of Ford PIDs in this manual.
PID
Description
Ford Units
AAT
Ambient Air Temperature
Degrees
AAT_V
Ambient Air Temperature Voltage
Volts
ACP_V
A ...