Ford Focus Service Manual: Camshaft End Play

Ford Focus Service Manual / Powertrain / Engine / Valvetrain / Camshaft / Camshaft End Play

Special Tool(s)

Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent

NOTE:

Refer to the appropriate Section 303-01 for the specification.

Using the Dial Indicator Gauge with Holding Fixture, measure the camshaft end play.

Position the camshaft to the rear of the cylinder head.

Zero the Dial Indicator Gauge.

Move the camshaft to the front of the cylinder head. Note and record the camshaft end play.
- If camshaft end play exceeds specifications, install a new camshaft and recheck end play.
- If camshaft end play exceeds specification after camshaft installation, install a new cylinder head.

Camshaft

...

Camshaft Journal to Bearing Clearance

NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: The camshaft journals must meet specifications before checking camshaft journal clearance. Measure each camshaft ...

More about Ford Focus:

Ford Focus Programming the remote control
A maximum of eight remote controls (including any supplied with your vehicle) can be programmed. The remote controls must remain inside the vehicle during the programming procedure. Fasten the front seat belts and close all doors to ensure that conflicting chimes do not sound during programmi ...