CAUTION:
If you use the socket when the engine is not running, the battery may discharge.
Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 10 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets.
Auxiliary power sockets are located in the centre console and in the luggage compartment.
Power inverter
CAUTIONS:
If you use the socket when the engine is not running, the battery may discharge.
If the LED flashes continuously, re-insert the plug or switch the ignition off and then on again.
It will switch off if the temperature is above 85°C (185°F). The LED will flash once. When it has cooled down it will switch back on automatically.
Do not exceed the maximum power output. If you do, the LED will flash twice. Remove the plug and re-insert it.
If the LED flashes 3 or 4 times, have the system checked by a properly trained technician.
Note: You can use the socket to power 230 volt appliances that have a maximum rating of 150 watts.
Ford Focus Piston Ring-to-Groove Clearance
Special Tool(s)
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the appropriate Section 303-01 for the specification.
Inspect the piston for ring land damage or accelerated wear.
Using the Feeler Gauge Set, measure the piston ...